Replace 400W Metal Halide Lamps With 200W LED High Bay

Time：2015-09-17　Views：2571　Compile：SUNPER

There is always a corresponding increase in the total power consumption of the 400 watts metal halide lamps under the actual field conditions. The actual total power consumption is usually more than 400 watts and that of the actual total SUNPER 200W LED high bay is 200 watts which is equivalent to 10 percent.

Nowadays, most of the factories are using the modern lighting products such as the high pressure mercury lamps, metal halide, high power fluorescent lamps as well as the 200w LED high bay lights. There is a common feature that all these lamps have and is none other but about the light efficiency. It is low and thus in order to meet the required brightness, a larger power source must be used. Therefore, a lot of power is consumed and this gives big electricity bills. This leads to large lighting current and temperature that speeds up the lines of aging. Most of the power plants use fluorescent lamps so as to save when it comes to energy bills. They are not suitable for more than 8 meters in factory buildings because the light efficiency is not high and light penetration is not strong enough.

The features of most of the variety plants include the following

Metal halide lamps have high efficiency and maximum power of up to 2000W and the color is good. However, the lifespan is short with only 3000 to 6000 hours and thus energy consumption is relatively high. They are widely used in airports, docks, squares and in advertising. The high power fluorescent lamps have low light efficiency and consequently the price is cheaper as well. The light duration and penetration is not very strong. Due to these reasons, they are used in low plants, offices and warehouses. They are not very effective when used in buildings of over 8 meters.

The three 200w LED high bay lights properties include the following

The first one is that there is high efficiency and thus high energy saving. To ensure that the highest luminous efficiency of the light source lamp, a 100W replaces 250W metal halide, the 200W replaces 400W metal halide and the 400W replaces 1000W metal halide. By doing that, the factory lighting will save up to 60 percent. There is also high quality light and with full spectrum which is clear, natural as well as comfortable. The spectrum of the 200W LED high bay lights is very close and this allows the workers to feel more energetic as well as to improve their comfort thereby improving their performance.

The other property is about the high color rendering index. The ceramic enterprises, dyeing enterprises and printing requirements are high and they cost continuous transformation of the indoor lighting environment. This allows customers to have a more convenient way to select the sample and thus reduces the complaints. 

The last property that is associated with the 200W LED high bay lights is about their long lifespan of around 50,000 hours. This lifespan is more than that of the metal halide lamp as well as that of the high-pressure sodium lamp. 

More Posts

█ 100W LED High Bay replace 250W Metal Halide

█ What to Know When Replacing a 400W Metal Halide

█ 400W Metal Halide Pay Back Solution