Lighting Education

Your current location: home > Blog

Requirements of LED factory lighting

Time:2015-12-18 Views:1318 Compile:SUNPER

Light-emitting diode lighting is quite different from the traditional lighting. LEDs have been widely used in Christmas fairy lights, remote controls as well as digital devices for quite sometimes. More recently, they have actually began to be more widely available for lighting in many homes, and have become a more popular and energy efficient lighting solution. Binding characteristics corresponding to tall plant and depending on the application environment for the LED factory lighting usually propose specific requirements. Some of these requirements include the following: 

Heat dissipation issues and power supply technical requirements

LED lights are usually used to install the entire way of cooling fins. Heat LED chip packaging technology via good will is generated by conduction to the heat sink while the heat sink is generated through the heat divergence into the surrounding air. The connection of the heat sink and the LED particles, the heat sink material of choice, and the size of the effective cooling area of the sink will greatly affect the cooling effect of the entire LED light. 

However, one of the disadvantages of LED lighting tech is power supply. The power supply failure is ranking high on the LED lighting market. High-power LED lamps require much more current power supply that leads to higher stability of the power supply requirements. Therefore, high-power lighting drive power technology determines the merits of the performance reference index. 

Lighting curve requirements

When choosing LED lamps for LED factory lighting, they should meet the requirements of lighting curve. It’s commonly used to solve the LED lamp lenses refract light secondary issue. Secondary light manner using a combination of light may help to improve the accuracy and also flexibility of LED lights. 

Lighting installation requirements

Tall plants usually have huge space and on a windy weather, the air that could be flowing inside may be very intense. You therefore need to consider this factor when installing lighting products so as to prevent the phenomenon of violent shaking. LED lamps are typically light, thus you may use the rigid connections made of steel beams mounted on the plant. Led lamps should also have a compact structure in order to avoid abnormal noise that could affect the production activities. 

Lamp housing requirements

Since the factory’s lights work environment are located indoors, no special requirements for its lamp housing are needed. Tall plant within the production environment is usually more severe since there is production of dust during the products assembly and also cutting the welding process usually produce smoke. Lighting needs to have a good seal so as to prevent dust into the lamp glass inner cover that may affect lighting efficiency. 

In order to prevent dust penetration, LED lamp housing should have IP5X for more protection with accordance to the requirements for low-voltage electrical enclosures class. This is because the shipyard cutting workshop, steel pretreatment workshop, part workshop, outfitting shop, assembly and welding workshop, painting workshop and other production process will produce large workshop welding smoke. Due to the small welding fume particles, LED lamp shell should have IP6X of degree of protection, in order to prevent dust penetration. 

User comments

Your current input 0 characters(Reply for at least 6 characters)。

Online Services


Mobile: +86 18938902515 (Mr.Allen)

Tel:+86 755 23159099

Fax:+86 755 61673151


zip code: 518108

Quick Messge