Production steps of the high power LED flood lamp
To begin with, a good manufacturing process should lead to a clean, generous as well as beautiful lamp. Each of the steps involved in this process is usually very important in the LED flood lamp.The first step is about the light source aluminum welding in the corresponding plate. In this step, one needs to just pay att..
The LED chip dissipation of high bay lamps
The LED chip dissipation of the high bay lamps is the heat lost into the air during the lamp housing. If the heat is not very good due to the heat capacity of the LED chip being very small, there is a bit of heat accumulation that makes the chip junction temperature to increase rapidly. If it remains in the state of hi..
100W LED High Bay replace 250W Metal Halide
Light power testOne should determine the total power consumption and voltage under the actual field conditions necessary for the 250W metal halide. There is a corresponding increase in the proportion in the total power consumption as it is above 300W. The SUNPER 100W LED high bay voltage in the actual conditions of the..
LM79 and LM80 Differences Explained
LM-79 explainedIES LM-79 has been approved by the IESNA. This is the abbreviation of the Illuminating Engineering Society of the North America. It was approved because it achieved the lighting energy efficiency standards required by this body. This is the main test for the optical performance testing. However, some of ..
Comparisons between HPS and LED hibay performance
1. Life comparisonLED hibay is basically a semiconductor diode and its source theory of life is very long. The principle of this hibay is to meet within the required temperature range section, L70 light fades standards. However, the entire life of the lamp light source is not very easy since lighting also includes a le..
Differences between LED HighBay and LED Low Bay Fixtures
Some people tend to think that LED High Bay lights and LED low Bay fixtures are similar. This is because both of them are perfect for low mount applications such as gyms, warehouses, food processing plants, hangars as well as assembly areas. They normally use LED source that is a unique kind of lighting and is more int..
LED Floodlights Heat Sink Selection
Have you ever come across the LED floodlights and wondered what it is? Well, this is definitely what many people ask themselves about. Basically, the LED floodlights is a part of the LED outdoor lamps. It is an IP65 - IP67 waterproof grade and is fully adapted both indoor and outdoor in various humidity environment of ..
Color Temperature and Its Importance
What is color temperature?Have you ever asked yourself what is the color temperature? Well, the color temperature of any light source is basically the temperature of the black body radiator measured in Kelvin commonly abbreviated as K. It radiates the light of the hue which is similar to the one produced by the light ..
The Color Rendering Index CRI
CRI in full means color rendering index. It is a quantitative measure of the capability of a light source to reveal colors of different objects in comparison with a natural or ideal light source. Light source with high CRI are usually more desirable in color-critical applications like neonatal care, cinematography as w..
A simple guideline to follow when installing LED highbay lights
When it comes to installation of the LED highbay lights, the proper procedure must be followed in order to make sure that the right installation has been done. Nowadays, most of the people are already aware of the LED highbay and therefore the installation process may not be a hassle. If you are not sure of how to go a..
Online Services
Mobile: +86 18938902515 (Mr.Allen)
Tel:+86 755 23159099
Fax:+86 755 61673151
E-mail: sales@sunper.net
zip code: 518108